How to Pressure Wash Vinyl Siding

How to Pressure Wash Vinyl Siding

Pressure washing vinyl siding can help to keep it looking new for years to come. This is a great way to clean the siding and remove any built-up dirt or grime, and it only takes a few minutes to do.

But like all cleaning jobs, it’s not always easy. In this article we’ll show you how to pressure wash vinyl siding so you can get rid of algae, dirt and moss.

Step 1: Get the Right Pressure Washer for Vinyl Siding

You can’t pressure wash vinyl siding with your everyday garden hose. Your regular sprayer won’t have enough pressure to do the job, and it might damage your siding.

You need a powerful air compressor or an electric one with the right attachments. We recommend an industrial-grade compressor designed for pressure washing. It’s important that it has enough power to do the job quickly and cleanly without damaging your siding.

Step 2: Set Up the Pressure Washer

Once you have your pressure washer, set it up according to the manufacturer’s instructions. Make sure you read the manual carefully so you know how to use it properly.

Step 3: Choose the Right Detergent for Vinyl Siding

There are pressure washing detergents made specifically for vinyl siding. These are usually milder than ones made for other surfaces like concrete or brick. That’s because vinyl is a softer material and can be easily damaged by harsh chemicals.

If you can’t find a pressure washing detergent made specifically for vinyl siding, you can use a mild all-purpose cleaner or even dish soap. Avoid using any cleaners that contain bleach or ammonia, as these can damage your siding.

Step 4: Pressure wash your vinyl siding

Now you’re ready to pressure wash your vinyl siding. Start at the top of the siding and work your way down. Holding the pressure washer nozzle about a foot away from the surface, move it back and forth in a sweeping motion as you work your way down.

Be sure to overlap each stroke so you don’t miss any spots. When you’re finished, move on to the next section and repeat the process until you’ve pressure washed the entire area.

Step 5: Rinse off the Vinyl Siding

Once you’ve pressure washed the entire area, it’s time to rinse off the detergent. Use clean water and the pressure washer to rinse away all the soap.

Be sure to go over the area a few times to make sure all the detergent is removed.

Step 6: Let the Vinyl Siding Dry

After you’ve rinsed off the siding, let it dry completely before you do anything else. This usually takes about an hour, but it might take longer if it’s a hot day or there’s a lot of sun.

And that’s it! You’ve successfully pressure washed your vinyl siding and removed all the dirt, grime and mildew. Pressure washing is a great way to keep your siding looking new, and it only takes a few minutes to do.